The Shaker Line
Neo-Shaker, oiled cherry
Oiled cherry, straight lines and tapered legs, with nothing on the piece that the piece doesn't need. A side chair, a table, a sideboard and a side table that share one wood and one finish.
Add a passkey so next time you can sign in instantly, with no email step.
Pick a design, set it to the exact size your space needs, and every size is checked for clashes and joint fit before it can be ordered. A local wood shop cuts your parts from a pack that's already been checked and nested. You glue it together and finish it yourself. The designer who drew it is credited throughout.
No signup. Open a real design, drag the sliders, and watch it recompile and check itself in your browser, live.
Four sets of pieces that share a wood, a finish and a look. Open one to see every piece in it.
Neo-Shaker, oiled cherry
Oiled cherry, straight lines and tapered legs, with nothing on the piece that the piece doesn't need. A side chair, a table, a sideboard and a side table that share one wood and one finish.
Contemporary minimal and Japanese, white oak
Low, pale and almost without ornament. White oak throughout, with one dark lattice lantern as the room's single contrast. A bench, a low table, a wall console, a wall shelf and the lantern.
Art Deco revival, veneer and lacquer
An Art Deco revival in veneer and lacquer, with ivory-coloured detail. A side chair, a console table, a cabinet on turned legs and a veneered tray.
Mid-century and Danish, walnut and oak
Walnut and oak together, with round tapered legs and clean flat tops. A slat-back chair, a dining table, a credenza and a side table.
From a design you like to a kit on your bench.
Browse parametric designs. You set the dimensions instead of taking a fixed size.
Drag the sliders that matter for your room. Every size you can reach is compiled and checked, including sizes the designer never drew.
Your exact configuration is turned into a fabrication pack and routed to a wood shop that can cut it.
Your kit arrives flat-packed with a generated assembly guide and finishing guide. You glue it up and finish it yourself.
Who does what, so nothing surprises you on delivery day.
Here is what is checked, and what is not.
The exact size you choose is compiled and checked before it can be ordered, not only the default.
Where a design has been built and photographed by other makers, that's shown on its page alongside the design itself.
From delivery, you have 30 days to flag a problem. Every report is triaged to find the cause before a fix is decided.
What "checked" means: every size is checked for clashes and joint fit before it can be ordered. That is a check on geometry: no two parts overlap, and every joint the designer declared touches. It says nothing about strength or safety.
Not yet. Right now you can join the waitlist, and once fabrication opens we're starting with a small pilot network in one metro area in the US or Canada first (not yet chosen) before opening more broadly. Join the waitlist below and we'll email you when it's your turn.
When you set a size, that exact configuration is compiled and run through a check that confirms no two parts overlap and every declared joint touches. A configuration that fails the check can't be ordered.
A wood shop in our fabricator network, matched to your design and region. They receive a pre-checked, pre-nested fabrication pack and cut to it. They don't redesign it.
Basic comfort with glue, clamps and sandpaper is enough for most designs. Your kit comes with a generated assembly guide and a finishing guide written for the specific material and finish you chose.
Report it within 30 days of delivery with the part label and a photo. We triage every report to find the cause (a fabrication slip, transit damage, a design fault, or something on the assembly side) before deciding the fix.
Yes, free of charge, right up until the shop commits material to your order (shown as a date on your order page). After that point, cancelling refunds you minus any documented work already done.
Yes. The person who published the design is named on its page, and their name appears again in your assembly guide and on the kit label.
We're not quoting prices during the waitlist stage. Cost depends on your size, material and local shop. Once configuring opens, you'll see a price estimate alongside the sliders before you commit to anything.
Yes. Every part's grain direction is part of the design itself, not just something drawn on top. The compiler uses it to decide where a groove or dado can run, which faces are end grain, and how a part is labeled on the cut list, so a resize can't quietly turn a part's grain the wrong way without the check catching it.
A joint you declare, like a dovetail or a mortise and tenon, is a named object the compiler resolves and measures, not just two lines that happen to meet on a drawing. At your exact size, it checks that the two parts the joint names actually touch. A configuration where a joint would gap or miss can't be ordered.
Not live yet
Ordering isn't open. Tell us what you're after and we'll email you when it is.
The pictures are renders of the designs, not photographs. Photographs of built pieces replace them as they exist.