New Project

Pop Laminate Stepped Sideboard

Configure
Loading the 3D model…

Size at its defaults: 61.4 × 16.5 × 37.8 in (1560 × 420 × 960 mm)

Sliders

Envelope

ParameterNameRangeDefault
Depthdepth13.4–19.7 in (340–500 mm)16.5 in (420 mm)
Tall Bay Widthbw115.0–27.6 in (380–700 mm)20.5 in (520 mm)
Middle Bay Widthbw213.4–25.2 in (340–640 mm)18.1 in (460 mm)
Low Bay Widthbw311.8–22.0 in (300–560 mm)15.7 in (400 mm)
Tall Bay Heightht131.5–43.3 in (800–1100 mm)35.4 in (900 mm)
Step between Baysstep4.7–9.8 in (120–250 mm)7.9 in (200 mm)
Plinth Heightplinth_h2.0–3.9 in (50–100 mm)3.1 in (80 mm)
Plinth Overhang each Sideplinth_over0.8–3.9 in (20–100 mm)1.6 in (40 mm)

Fit

ParameterNameRangeDefault
Glue Clearanceglue_clearance0.0–0.0 in (0–0 mm)0.0 in (0 mm)

Geometry

ParameterNameRangeDefault
Drum Diameterdrum_d3.9–9.4 in (100–240 mm)7.1 in (180 mm)
Drum Heightdrum_h5.5–13.4 in (140–340 mm)10.2 in (260 mm)
Shelf Positionshelf_pos0.0–0.0 in (0–1 mm)0.0 in (0 mm)

Joinery

ParameterNameRangeDefault
Dowel Diameterdowel_d0.2–0.4 in (6–10 mm)0.3 in (8 mm)
Dowel Spacingdowel_spacing2.8–5.5 in (70–140 mm)3.9 in (100 mm)

Stock

ParameterNameRangeDefault
Board Thicknessth0.9–1.2 in (22–30 mm)1.0 in (25 mm)

Techniques used

Licence: CC BY 4.0 (pending counsel review).

Settings

Region

A region picks sensible defaults; change any of these separately.

Units

In inches, type lengths the way you say them: 34 1/2, 3/4", 1'-2" or 12.7mm. A length that can't be read is flagged, never rounded to something else.

Paper
Date order
Clock