Size at its defaults: 38.1 × 17.9 × 40.5 in (968 × 454 × 1028 mm)
Sliders
Envelope
| Parameter | Name | Range | Default |
|---|
| Case Width | w | 31.5–39.4 in (800–1000 mm) | 37.0 in (940 mm) |
| Case Depth | d | 14.2–19.7 in (360–500 mm) | 16.5 in (420 mm) |
| Case Height | case_h | 20.5–28.3 in (520–720 mm) | 23.6 in (600 mm) |
| Leg Height Incl. Sabot | leg_h | 13.4–18.9 in (340–480 mm) | 15.7 in (400 mm) |
Joinery
| Parameter | Name | Range | Default |
|---|
| Dovetail Pins | dt_pins | 0.1–0.2 in (3–5 mm) | 0.2 in (4 mm) |
| Back Rabbet Depth | rb_depth | 0.2–0.4 in (6–9 mm) | 0.3 in (7 mm) |
| Shelf Housing Depth | dado_depth | 0.2–0.4 in (6–10 mm) | 0.3 in (8 mm) |
| Stopped Dado Setback | dado_stop | 0.3–0.8 in (8–20 mm) | 0.5 in (12 mm) |
| Leg Tenon Thickness | tenon_th | 0.4–0.6 in (10–14 mm) | 0.6 in (14 mm) |
| Leg Tenon Length | tenon_len | 0.3–0.6 in (8–14 mm) | 0.5 in (12 mm) |
| Dowel Diameter | dowel_d | 0.2–0.3 in (5–8 mm) | 0.2 in (6 mm) |
| Cap Dowel Diameter | cap_dowel_d | 0.2–0.4 in (6–10 mm) | 0.3 in (8 mm) |
| Cap Dowel Depth | cap_dowel_depth | 0.3–0.5 in (8–12 mm) | 0.4 in (10 mm) |
| Hinge Distance From Door Ends | hinge_in | 2.8–4.7 in (70–120 mm) | 3.5 in (90 mm) |
| Glue Clearance | glue_clearance | 0.0–0.0 in (0–0 mm) | 0.0 in (0 mm) |
Legs
| Parameter | Name | Range | Default |
|---|
| Leg Square Section | leg_dim | 1.8–2.4 in (46–60 mm) | 2.1 in (54 mm) |
| Leg Inset From Case Face | leg_in | 0.6–1.1 in (16–28 mm) | 0.7 in (18 mm) |
| Square Pommel Height | pommel_h | 1.8–3.0 in (45–75 mm) | 2.2 in (55 mm) |
| Ankle Radius | foot_r | 0.4–0.6 in (10–15 mm) | 0.5 in (12 mm) |
| Shoulder Radius Fraction | shoulder | 0.8–1 | 0.9 |
| Swelling Position (fraction of turned length) | belly_at | 0.08–0.22 | 0.16 |
| Sabot Height | sabot_h | 1.2–2.2 in (30–55 mm) | 1.7 in (42 mm) |
| Sabot Flare | sabot_flare | 0.1–0.2 in (2–4 mm) | 0.1 in (3 mm) |
Stock
| Parameter | Name | Range | Default |
|---|
| Carcase Board Thickness | case_th | 0.7–1.0 in (19–26 mm) | 0.9 in (22 mm) |
| Shelf Thickness | shelf_th | 0.7–1.0 in (19–26 mm) | 0.9 in (22 mm) |
| Back Panel Thickness (Finished) | back_th | 0.2–0.3 in (5–6 mm) | 0.2 in (6 mm) |
| Door Thickness | door_th | 0.7–0.9 in (18–24 mm) | 0.8 in (20 mm) |
| Door Reveal | door_gap | 0.1–0.2 in (2–4 mm) | 0.1 in (3 mm) |
| Cap Thickness | cap_th | 0.9–1.4 in (24–36 mm) | 1.1 in (28 mm) |
| Cap Overhang | cap_over | 0.3–0.9 in (8–24 mm) | 0.6 in (14 mm) |
| Veneer Thickness | veneer_th | 0.0–0.0 in (1–1 mm) | 0.0 in (1 mm) |
| Shelf Height Fraction | shelf_frac | 0.35–0.6 | 0.5 |
Techniques used
Licence: CC BY 4.0 (pending counsel review).
