Cabinet On Stand

Cotswold Workshop

Loading the 3D model…

Size at its defaults: 27.6 × 12.6 × 48.0 in (700 × 320 × 1220 mm)

Sliders

Carcase

Parameter	Name	Range	Default
Carcase Board Thickness	`carc_th`	0.7–0.9 in (18–24 mm)	0.8 in (20 mm)
Back Thickness	`back_th`	0.3–0.5 in (8–12 mm)	0.4 in (10 mm)

Doors

Parameter	Name	Range	Default
Door Thickness	`door_th`	0.7–0.9 in (18–24 mm)	0.8 in (20 mm)
Door Stile Width	`door_stile`	2.0–2.8 in (50–70 mm)	2.4 in (60 mm)
Door Rail Width	`door_rail`	2.2–3.3 in (55–85 mm)	2.8 in (70 mm)
Door Meeting Gap	`door_gap`	0.1–0.2 in (2–5 mm)	0.1 in (3 mm)
Door Panel Thickness	`panel_th`	0.3–0.5 in (8–12 mm)	0.4 in (10 mm)
Panel Groove Depth	`groove_d`	0.3–0.5 in (8–12 mm)	0.4 in (10 mm)

Envelope

Parameter	Name	Range	Default
Cabinet Width	`cab_w`	26.0–31.5 in (660–800 mm)	27.6 in (700 mm)
Cabinet Depth	`cab_d`	10.2–13.4 in (260–340 mm)	11.4 in (290 mm)
Cabinet Height	`cab_h`	19.7–25.2 in (500–640 mm)	22.0 in (560 mm)
Stand Height	`stand_h`	24.4–29.1 in (620–740 mm)	26.0 in (660 mm)
Carcase Overhang	`oh`	0.4–1.2 in (10–30 mm)	0.8 in (20 mm)

Joinery

Parameter	Name	Range	Default
Glue Relief	`glue_clearance`	0.0–0.0 in (0–0 mm)	0.0 in (0 mm)
Rail Tenon Thickness	`rail_tenon_th`	0.6–0.7 in (14–18 mm)	0.6 in (16 mm)
Tenon Proud	`tenon_proud`	0.2–0.6 in (6–14 mm)	0.4 in (10 mm)

Stand

Parameter	Name	Range	Default
Leg Section	`leg`	2.0–2.5 in (50–64 mm)	2.2 in (56 mm)
Apron Rail Thickness	`rail_th`	0.9–1.3 in (24–32 mm)	1.1 in (28 mm)
Apron Rail Height	`rail_h`	3.5–4.7 in (90–120 mm)	3.9 in (100 mm)
Low Stretcher Height	`low_h`	2.0–2.8 in (50–70 mm)	2.4 in (60 mm)
Low Stretcher Height Above Floor	`cross_h`	6.3–10.2 in (160–260 mm)	7.9 in (200 mm)
Leg Chamfer	`chamfer_sz`	0.1–0.3 in (3–7 mm)	0.2 in (5 mm)
Chamfer Clear Of Joints	`chamfer_stop`	0.6–1.4 in (15–35 mm)	1.0 in (25 mm)
Square Foot Stub	`foot_stub`	0.8–1.8 in (20–45 mm)	1.2 in (30 mm)

Techniques used

Licence: CC BY 4.0 (pending counsel review).