New Project

Deco Side Chair

Configure
Loading the 3D model…

Size at its defaults: 18.1 × 17.9 × 34.1 in (460 × 455 × 865 mm)

Sliders

Back

ParameterNameRangeDefault
Crest Heightcrest_h1.4–2.2 in (36–56 mm)1.7 in (44 mm)
Crest Step Risestep_h0.2–0.6 in (6–14 mm)0.4 in (9 mm)
Crest Lower Step Widthtab_w17.9–11.8 in (200–300 mm)10.2 in (260 mm)
Crest Upper Step Widthtab_w23.5–6.7 in (90–170 mm)5.1 in (130 mm)
Back Rail Thicknessback_th0.7–0.9 in (18–24 mm)0.8 in (20 mm)
Cross Rail Above Seatcross_gap3.1–5.1 in (80–130 mm)3.9 in (100 mm)
Cross Rail Heightcross_h1.3–1.7 in (32–44 mm)1.4 in (36 mm)
Splat Widthsplat_w5.9–8.7 in (150–220 mm)7.1 in (180 mm)
Splat Thicknesssplat_th0.5–0.6 in (12–16 mm)0.6 in (14 mm)
Splat Setback (fraction of half-width)setback0.14–0.280.22
Sunburst Leaves per Tiersplat_leaves0.2–0.3 in (4–8 mm)0.2 in (6 mm)
Veneer Thicknessveneer_th0.0–0.0 in (1–1 mm)0.0 in (1 mm)

Envelope

ParameterNameRangeDefault
Seat Widthseat_width16.5–20.5 in (420–520 mm)18.1 in (460 mm)
Seat Depthseat_depth15.4–18.1 in (390–460 mm)16.5 in (420 mm)
Seat Height (rail top)seat_height16.9–18.9 in (430–480 mm)17.7 in (450 mm)
Seat to Crest Topback_h14.2–17.7 in (360–450 mm)15.7 in (400 mm)
Back Rakeback_rake3–8°5°

Fit

ParameterNameRangeDefault
Glue Reliefglue_clearance0.0–0.0 in (0–0 mm)0.0 in (0 mm)

Legs

ParameterNameRangeDefault
Leg Section (top)leg_dim1.2–1.5 in (30–38 mm)1.3 in (34 mm)
Rear Leg Foot Sectioncuff_dim0.7–1.0 in (18–26 mm)0.9 in (22 mm)
Fuseau Shoulder Radius Fractionshoulder0.8–10.9
Fuseau Swelling Positionbelly_at0.0–0.0 in (0–0 mm)0.0 in (0 mm)
Fuseau Ankle Radius Fractionankle0.42–0.60.5
Sabot Heightsabot_h0.9–1.6 in (24–40 mm)1.2 in (30 mm)
Sabot Flaresabot_flare0.1–0.2 in (2–4 mm)0.1 in (2 mm)

Seat

ParameterNameRangeDefault
Seat Pad Rise Above Railspad_rise0.6–1.3 in (16–34 mm)0.9 in (24 mm)

Stock

ParameterNameRangeDefault
Front Rail Heightfront_rail_h2.4–3.1 in (60–80 mm)2.8 in (70 mm)
Side Rail Heightside_rail_h2.0–2.8 in (50–70 mm)2.4 in (60 mm)
Rail Thicknessrail_th0.7–1.0 in (18–26 mm)0.9 in (22 mm)

Techniques used

Licence: CC BY 4.0 (pending counsel review).

Settings

Region

A region picks sensible defaults; change any of these separately.

Units

In inches, type lengths the way you say them: 34 1/2, 3/4", 1'-2" or 12.7mm. A length that can't be read is flagged, never rounded to something else.

Paper
Date order
Clock