New Project

Minimal Wall Console

Configure
Loading the 3D model…

Size at its defaults: 55.1 × 15.0 × 22.8 in (1400 × 380 × 580 mm)

Sliders

Drawer

ParameterNameRangeDefault
Reveal Gapreveal0.1–0.2 in (2–5 mm)0.1 in (3 mm)
Finger-Pull Anglepull_deg35–55°45°
Finger-Pull Depthpull_w0.2–0.6 in (6–14 mm)0.4 in (10 mm)

Envelope

ParameterNameRangeDefault
Console Widthcon_w31.5–43.3 in (800–1100 mm)43.3 in (1100 mm)
Console Depthcon_d11.8–15.7 in (300–400 mm)12.6 in (320 mm)
Case Heightcar_h6.3–9.4 in (160–240 mm)7.9 in (200 mm)
Hang Height off Floorhang_z15.7–31.5 in (400–800 mm)19.7 in (500 mm)

Joinery

ParameterNameRangeDefault
Glue Reliefglue_clearance0.0–0.0 in (0–0 mm)0.0 in (0 mm)

Top

ParameterNameRangeDefault
Top Thicknesstop_th1.0–1.3 in (26–34 mm)1.2 in (30 mm)
Underside Bevel Anglebevel_deg40–50°45°
Case Set-Backset_back1.3–2.4 in (32–60 mm)1.3 in (32 mm)
Top Overhang at Endstop_over1.3–2.4 in (32–60 mm)1.3 in (32 mm)

Techniques used

Licence: CC BY 4.0 (pending counsel review).

Settings

Region

A region picks sensible defaults; change any of these separately.

Units

In inches, type lengths the way you say them: 34 1/2, 3/4", 1'-2" or 12.7mm. A length that can't be read is flagged, never rounded to something else.

Paper
Date order
Clock