New Project

Primary Grid Lath Side Table

Configure
Loading the 3D model…

Size at its defaults: 24.4 × 16.5 × 18.9 in (620 × 420 × 480 mm)

Sliders

Envelope

ParameterNameRangeDefault
Width, Outer Post to Outer Postwidth17.3–25.2 in (440–640 mm)20.5 in (520 mm)
Runner Length (Depth)depth14.2–20.5 in (360–520 mm)16.5 in (420 mm)
Overall Heightheight16.5–22.0 in (420–560 mm)18.9 in (480 mm)
Shelf Top Heightshelf_h6.3–10.2 in (160–260 mm)7.9 in (200 mm)

Joinery

ParameterNameRangeDefault
Dowel Diameterdowel_d0.2–0.4 in (6–9 mm)0.3 in (8 mm)
Dowel Hole Clearanceglue_clearance0.0–0.0 in (0–0 mm)0.0 in (0 mm)

Lattice

ParameterNameRangeDefault
Runner Overhang past Cross Sticksstick_setback2.0–3.9 in (50–100 mm)2.8 in (70 mm)
Cross Stick Run Past Postover0.8–2.8 in (20–70 mm)1.2 in (30 mm)
Top Stick Run Past Posttop_run1.2–3.9 in (30–100 mm)2.0 in (50 mm)
Stretcher Run Past Poststr_run0.8–2.4 in (20–60 mm)1.2 in (30 mm)
Top Board Overhang Sidewaystop_over1.2–3.9 in (30–100 mm)2.0 in (50 mm)
Shelf Clearance to Postsboard_gap0.1–0.2 in (2–6 mm)0.1 in (3 mm)

Stock

ParameterNameRangeDefault
Lath Section (Square)lath1.0–1.4 in (25–35 mm)1.2 in (30 mm)
Top Board Thicknesstop_th0.7–1.1 in (18–28 mm)0.9 in (22 mm)
Shelf Board Thicknessshelf_th0.6–0.9 in (16–22 mm)0.7 in (18 mm)

Techniques used

Licence: CC BY 4.0 (pending counsel review).

Settings

Region

A region picks sensible defaults; change any of these separately.

Units

In inches, type lengths the way you say them: 34 1/2, 3/4", 1'-2" or 12.7mm. A length that can't be read is flagged, never rounded to something else.

Paper
Date order
Clock