New Project

Studio Cabinet on Stand

Configure
Loading the 3D model…

Size at its defaults: 18.9 × 13.0 × 42.5 in (480 × 330 × 1080 mm)

Sliders

Case

ParameterNameRangeDefault
Case Board Thicknesscase_th0.6–0.9 in (16–22 mm)0.7 in (18 mm)
Back Thicknessback_th0.2–0.4 in (6–10 mm)0.3 in (8 mm)
Shelf Thicknessshelf_th0.6–0.8 in (14–20 mm)0.6 in (16 mm)
Shelf Height (share of opening)shelf_at0.35–0.650.5

Doors

ParameterNameRangeDefault
Door Thicknessdoor_th0.6–0.9 in (16–22 mm)0.7 in (18 mm)
Door Frame Widthframe_w1.3–1.9 in (32–48 mm)1.5 in (38 mm)
Door Panel Thicknesspanel_th0.3–0.4 in (8–10 mm)0.4 in (10 mm)
Panel Groove Depthgroove_d0.3–0.5 in (8–12 mm)0.4 in (9 mm)
Door Revealreveal0.1–0.2 in (2–4 mm)0.1 in (2 mm)
Panel Seasonal Gappanel_gap0.0–0.1 in (1–3 mm)0.1 in (2 mm)

Envelope

ParameterNameRangeDefault
Case Widthcase_w16.5–22.0 in (420–560 mm)18.9 in (480 mm)
Case Depthcase_d8.7–12.6 in (220–320 mm)10.2 in (260 mm)
Case Heightcase_h17.3–24.4 in (440–620 mm)20.5 in (520 mm)
Stand Heightstand_h18.9–26.8 in (480–680 mm)22.0 in (560 mm)
Stand Reach in Front of Casefront_proj1.6–4.3 in (40–110 mm)2.8 in (70 mm)

Joinery

ParameterNameRangeDefault
Glue Reliefglue_clear0.0–0.0 in (0–0 mm)0.0 in (0 mm)

Stand

ParameterNameRangeDefault
Leg Width at Topleg_w1.3–1.8 in (32–46 mm)1.5 in (38 mm)
Leg Width at Footleg_foot0.7–1.1 in (18–28 mm)0.9 in (22 mm)
Rail Heightrail_w1.7–2.8 in (44–70 mm)2.2 in (56 mm)
Rail Thicknessrail_th0.7–1.0 in (18–26 mm)0.9 in (22 mm)

Techniques used

Licence: CC BY 4.0 (pending counsel review).

Settings

Region

A region picks sensible defaults; change any of these separately.

Units

In inches, type lengths the way you say them: 34 1/2, 3/4", 1'-2" or 12.7mm. A length that can't be read is flagged, never rounded to something else.

Paper
Date order
Clock