New Project

Studio Slab Dining Table

Configure
Loading the 3D model…

Size at its defaults: 74.8 × 35.4 × 29.1 in (1900 × 900 × 740 mm)

Sliders

Base

ParameterNameRangeDefault
Trestle Inset From Endsleg_inset9.8–19.7 in (250–500 mm)13.8 in (350 mm)
Trestle Thicknesstrestle_th2.0–3.0 in (50–75 mm)2.4 in (60 mm)
Trestle Widthtrestle_width17.3–23.6 in (440–600 mm)20.5 in (520 mm)
Trestle Waist Insetwaist_inset0.0–3.1 in (0–80 mm)1.8 in (45 mm)
Trestle Waist Depthwaist_z9.8–17.7 in (250–450 mm)14.2 in (360 mm)
Foot Chamferfoot_chamfer0.1–0.3 in (3–8 mm)0.2 in (5 mm)
Stretcher Thicknessstretcher_th1.6–2.6 in (40–65 mm)2.0 in (50 mm)
Stretcher Heightstretcher_h3.5–5.5 in (90–140 mm)4.3 in (110 mm)
Stretcher Height off Floorstretcher_z6.7–13.0 in (170–330 mm)9.1 in (230 mm)

Envelope

ParameterNameRangeDefault
Top Lengthtop_l63.0–90.6 in (1600–2300 mm)74.8 in (1900 mm)
Top Widthtop_w31.5–39.4 in (800–1000 mm)35.4 in (900 mm)
Table Heighttable_h28.3–29.9 in (720–760 mm)29.1 in (740 mm)
Top Thicknesstop_th1.6–2.6 in (40–65 mm)2.0 in (50 mm)
Free-Edge Swingedge_wave0.0–2.8 in (0–70 mm)1.8 in (45 mm)

Joinery

ParameterNameRangeDefault
Glue Reliefglue_clear0.0–0.0 in (0–0 mm)0.0 in (0 mm)
Tenon Shoulder Revealtenon_shoulder0.2–0.5 in (6–12 mm)0.3 in (8 mm)
Stretcher Tenon Proudtenon_proud0.6–1.2 in (15–30 mm)0.8 in (20 mm)

Keys

ParameterNameRangeDefault
Key Lengthkey_len3.9–6.7 in (100–170 mm)5.1 in (130 mm)
Key Width at Endskey_wid1.6–2.8 in (40–70 mm)2.2 in (55 mm)
Key Width at Waistkey_neck0.6–1.3 in (16–32 mm)0.9 in (24 mm)
Key Depthkey_depth0.5–0.8 in (12–20 mm)0.6 in (16 mm)

Techniques used

Licence: CC BY 4.0 (pending counsel review).

Settings

Region

A region picks sensible defaults; change any of these separately.

Units

In inches, type lengths the way you say them: 34 1/2, 3/4", 1'-2" or 12.7mm. A length that can't be read is flagged, never rounded to something else.

Paper
Date order
Clock