Kiri Tansu

Loading the 3D model…

Size at its defaults: 35.4 × 16.5 × 32.3 in (900 × 420 × 820 mm)

Sliders

Envelope

Parameter	Name	Range	Default
Overall Width	`width`	31.5–43.3 in (800–1100 mm)	35.4 in (900 mm)
Overall Depth	`depth`	14.2–18.1 in (360–460 mm)	15.7 in (400 mm)
Overall Height	`height`	27.6–37.8 in (700–960 mm)	32.3 in (820 mm)
Plinth Height	`base_h`	2.0–3.9 in (50–100 mm)	2.8 in (70 mm)

Fit

Parameter	Name	Range	Default
Drawer Reveal	`reveal`	0.0–0.1 in (1–3 mm)	0.1 in (2 mm)
Housing Depth	`dado_depth`	0.2–0.2 in (4–5 mm)	0.2 in (5 mm)
Door Track Setback	`track_y`	0.9–2.4 in (24–60 mm)	1.6 in (40 mm)
Glue Relief	`glue_clearance`	0.0–0.0 in (0–0 mm)	0.0 in (0 mm)

Joinery

Parameter	Name	Range	Default
Carcase Finger Count	`finger_pins`	3–5	4
Drawer Dovetail Pins	`dovetail_pins`	0.1–0.2 in (2–4 mm)	0.1 in (3 mm)

Layout

Parameter	Name	Range	Default
Left Bay Share	`left_share`	0.34–0.46	0.4
Door Compartment Height	`door_open_h`	7.9–11.8 in (200–300 mm)	9.4 in (240 mm)
Left Upper Drawer Share	`left_split`	0.38–0.48	0.42
Right Top Drawer Share	`top_share`	0.22–0.3	0.26
Right Middle Drawer Share	`mid_share`	0.3–0.34	0.32

Stock

Parameter	Name	Range	Default
Side Thickness	`side_th`	0.6–0.9 in (16–22 mm)	0.7 in (18 mm)
Top and Bottom Thickness	`tb_th`	0.7–0.9 in (18–24 mm)	0.8 in (20 mm)
Partition Thickness	`part_th`	0.6–0.8 in (14–20 mm)	0.6 in (16 mm)
Divider Thickness	`shelf_th`	0.5–0.7 in (12–18 mm)	0.6 in (14 mm)
Back Thickness	`back_th`	0.4–0.6 in (9–15 mm)	0.5 in (12 mm)
Plinth Rail Thickness	`plinth_th`	0.6–0.9 in (16–22 mm)	0.7 in (18 mm)
Drawer Front Thickness	`front_th`	0.7–0.9 in (18–24 mm)	0.8 in (20 mm)
Drawer Side Thickness	`drawer_side_th`	0.4–0.5 in (9–13 mm)	0.4 in (10 mm)
Drawer Back Thickness	`drawer_back_th`	0.4–0.5 in (9–13 mm)	0.4 in (10 mm)
Drawer Bottom Thickness	`drawer_bottom_th`	0.2–0.3 in (5–8 mm)	0.2 in (6 mm)
Sliding Door Thickness	`door_th`	0.3–0.4 in (7–10 mm)	0.3 in (8 mm)

Techniques used

Licence: CC BY 4.0 (pending counsel review).