William and Mary Lowboy

William and Mary

Loading the 3D model…

Size at its defaults: 33.9 × 20.7 × 29.1 in (860 × 526 × 740 mm)

Sliders

Drawers

Parameter	Name	Range	Default
Drawer Front Height	`drawer_h`	3.5–5.5 in (90–140 mm)	4.3 in (110 mm)
Centre Drawer Share	`center_share`	0.4–0.54	0.46
Drawer Front Thickness	`front_th`	0.7–0.9 in (18–24 mm)	0.8 in (20 mm)
Drawer Side Thickness	`side_th`	0.4–0.6 in (10–14 mm)	0.5 in (12 mm)
Drawer Reveal	`reveal_gap`	0.0–0.1 in (1–2 mm)	0.1 in (2 mm)
Drawer Back Clearance	`back_gap`	0.4–1.6 in (10–40 mm)	0.8 in (20 mm)

Envelope

Parameter	Name	Range	Default
Top Width	`width_o`	29.9–38.6 in (760–980 mm)	33.9 in (860 mm)
Top Depth	`depth_o`	18.1–23.6 in (460–600 mm)	20.5 in (520 mm)
Overall Height	`height_o`	27.6–31.5 in (700–800 mm)	29.1 in (740 mm)
Top Overhang	`top_overhang`	0.6–1.3 in (16–34 mm)	0.9 in (22 mm)

Fit

Parameter	Name	Range	Default
Glue Relief	`glue_clearance`	0.0–0.0 in (0–0 mm)	0.0 in (0 mm)

Joinery

Parameter	Name	Range	Default
Carcase Dovetail Pins	`dovetail_pin_count`	3–7	5

Stock

Parameter	Name	Range	Default
Top Thickness	`top_th`	0.8–1.1 in (20–28 mm)	0.9 in (22 mm)
Carcase Board Thickness	`case_th`	0.6–0.8 in (14–20 mm)	0.6 in (16 mm)
Divider Thickness	`div_th`	0.4–0.6 in (10–14 mm)	0.5 in (12 mm)
Leg Section	`leg_sq`	2.1–2.7 in (54–68 mm)	2.4 in (60 mm)
Skirt Height	`apron_h`	2.8–4.3 in (72–110 mm)	3.5 in (88 mm)
Skirt Thickness	`apron_th`	0.8–1.0 in (20–26 mm)	0.9 in (22 mm)
Stretcher Block	`block_h`	3.1–3.9 in (80–100 mm)	3.3 in (84 mm)
Bun Foot Length	`foot_len`	2.8–4.3 in (70–110 mm)	3.5 in (90 mm)
Stretcher Thickness	`stretch_th`	0.7–0.9 in (18–24 mm)	0.8 in (20 mm)

Style

Parameter	Name	Range	Default
Top Ogee	`top_ogee`	0.2–0.3 in (4–8 mm)	0.2 in (6 mm)
Skirt Arch Rise	`arch_frac`	0.25–0.45	0.38
Stretcher Lobe	`lobe`	0.2–0.6 in (6–14 mm)	0.4 in (10 mm)

Techniques used

Licence: CC BY 4.0 (pending counsel review).